Deep Blue Pro 500ml Spa Waterline Cleaning Spray

Welcome to the world of spa maintenance made easy with the Deep Blue Pro Spa Hot Tub Waterline Cleaner! Say goodbye to unsightly tide marks and hello to a sparkling clean hot tub experience like never before. This powerful cleaner is your go-to solution for effortlessly removing those stubborn waterline marks that can mar the beauty of your spa.

But why do you need a specialized cleaner for your hot tub’s waterline? Water contaminants can lead to the formation of tide marks, which not only look unattractive but can also be a breeding ground for bacteria. The Spa Waterline Cleaner is specially formulated to tackle this issue effectively without being harsh on your spa’s acrylic shell. With its non-abrasive and low foaming formula, you can trust it to get the job done without causing any damage.

When should you use the Deep Blue Pro Spa Hot Tub Waterline Cleaner? It is recommended to clean the waterline at least once a week or more frequently after heavy use. If you notice a visible waterline tide mark, it’s time to bring out this cleaner and restore the pristine look of your spa.

Wondering how to use this powerful cleaner for optimal results? Here’s a simple step-by-step guide:

1. Put on protective gloves and eye gear before using the product to ensure safety.
2. Lower the water level in your hot tub to access the waterline area that needs cleaning.
3. Apply a small amount of the waterline cleaner onto a sponge and gently rub it on the affected areas, being careful not to let the product drip into the spa water.
4. Let the cleaner sit for 2 minutes before gently scrubbing the tide mark until it disappears.
5. Wipe off any remaining residue with a clean, dry cloth.
6. Finally, top up the water to the normal operating level to enjoy your freshly cleaned spa.

It’s important to use the Deep Blue Pro Spa Hot Tub Waterline Cleaner sparingly for best results. Just cover the affected area with the product, let it stand for 2 minutes, and watch those tide marks vanish before your eyes. However, as with any cleaning product, there are some general precautions to keep in mind:

– Always wear eye and face protection to prevent any accidental exposure to the product.
– Never mix the cleaner with other chemicals or cleaning products, as this can lead to a dangerous reaction.
– When pre-dissolving the product, always add it to water and not the other way around for safety.
– Handle and store the product in a well-ventilated, dry area away from children and pets.

While the Deep Blue Pro Spa Hot Tub Waterline Cleaner is highly effective in removing tide marks, it’s essential to follow safety guidelines to protect yourself and the environment. Remember:

– This cleaner is harmful if swallowed, so keep it out of reach of children.
– Avoid contact with skin and eyes; in case of contact, rinse thoroughly with water and seek medical advice.
– Dispose of the product and its container as hazardous waste to prevent environmental contamination.

With its potent cleaning abilities and user-friendly application, the Deep Blue Pro Spa Hot Tub Waterline Cleaner is a must-have for every hot tub owner looking to maintain a pristine spa environment. Say goodbye to tide marks and hello to a cleaner, healthier hot tub experience with this exceptional product!

Manufacturers description:

Deep Blue Pro Spa Hot Tub Waterline Cleaner – A powerful cleaner for the removal of tide marks in hot tubs.

Why?Water contaminants can cause unsightly ‘tide marks’. Spa Waterline Cleaner has been specially formulated for use on your spas’s acrylic shell. It is a non-abrasive, low foaming cleaner.

When?It is good practice to clean the waterline at least every week or after heavy use. If a waterline tidy mark is visible, then apply and clean as follows:

How?

1. Wear protective gloves and eye protection whilst using this product.
2. Lower the water level sufficiently to allow cleaning of the waterline.
3. Add a small quantity of waterline cleaner to a sponge, apply to affected areas and rub gently,
taking care not to drip product into the spa water.
4. Leave for 2 minutes before gently rubbing again until the tide mark has been removed.
5. Thoroughly remove any remaining residue with a clean dry cloth.
6. Top up water to normal operating level.

How Much?Use sparingly, cover effected area, leave to stand for 2 minutes.
General Precautions:
Dosing:
· Wear eye and face protection and ensure granules are not blown back into your face.
· Never mix with any other chemicals including cleaning products and chlorine
products, as a dangerous reaction may occur.
· When pre-dissolving product always add to water not vice versa.
Handling/Storage:
· Handle products in a well-ventilated area, preferably outdoors.
· Wash hands after use.
· Ensure chemicals do not become damp in storage – store in a cool dry place.
Risk:
· Harmful if swallowed.
· Contact with acids liberates toxic gas.
· May cause sensitisation by inhalation and skin contact.
· Very toxic to aquatic organisms, may cause long term adverse effects in the aquatic
environment.
Safety:
· Use Biocides safely. Always read the label and product information before use.
· Keep locked up and out of reach of children.
· If swallowed, seek medical advice immediately and show this container or label.
· Keep container dry.
· Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately
with plenty of water and seek medical advise.
· In case of fire and/or explosion, do not breath fumes.
· This material and/or its container must be disposed of as hazardous waste.
· Avoid release to the environment.