Blue Horizons – Chlorine Reducer 6 X 1kg bromine minus CL-

Description

Reduces chlorine and bromineFast acting crystalProblem solver

More info:

Blue Horizons Chlorine Reducer Key Features/Characteristics Reduces chlorine & bromine Problem solver Blue Horizons Chlorine Reducer is used for lowering chlorine or bromine levels in pool water after shock treatment or as a problem solver if the pool has been accidentally ‘overdosed’. Application Instructions

1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons (10lts) of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the pool whilst the pump(s) are turned “on”, preferably near to the water inlets to aid distribution.

2. If applying after shock treatment, allow a minimum of 8 hours for shock chlorination to oxidise swimmer wastes from water before application.

3. Measure the free chlorine/total bromine level in the water, then using the dosing table below, calculate the total amount required.

4. Split this total amount into 4 smaller doses. Apply each smaller dose, allowing time to thoroughly circulate (2-3 hours for commercial pools/6-8 hours for domestic pools) before re-testing chlorine/bromine level and if necessary adding further doses. Dose rates Litres Gallons 4,545 1,000 9,090 2,000 22,500 5,000 45,450 10,000 68,175 15,000 1mg/l 23g 45g 114g 227g 341g To lower chlorine by 2mg/l 5mg/l 46g 114g 91g 227g 228g 568g 454g 1.14kg 682g 1.70kg