Description
The ideal spa pH level is between 7.2 – 7.6, promoting bather comfort, optimal chemical efficiency and protection of spa equipment. AquaSPArkle Spa pH Plus is a granular alkali used for raising the pH if it falls below 7.
2.
More info:
AquaSPArkle Spa pH Plus Key Features/Characteristics Powder for increasing pH Ideal pH Range: 7.2 – 7.6 Test the pH of your spa water and if it is below 7.2, use AquaSPArkle pH Plus to raise it. Application Instructions
1. Pre-dissolve the product in a clean plastic container at a maximum rate of 10g of product per 0.2 gallons (1ltr) of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the spa whilst the pump(s) are turned “on”.
2. After a minimum of 30 minutes, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Litres 1,000 1,500 Dose rates Gallons Dose rate 220 11g 330 17g Please note: a number of treatments may be required.
C/O Michael Wright –
Verified Customer Satisfied