Description
This spa foam remover has been specifically designed for removing and preventing foam in hot tubs. It is fast acting, of a neutral pH balance and efficient for removing foam created when the jets are activated.
Application instructions:
For best results turn down the pressure of the jets where possible.
Add to the water whilst the pump(s) are turned ‘on’, preferably near to the water inlets to aid distribution.
Water dose rates:
Hot tub: 1,000 litres (220 Gallons) of water – add 100ml for a fresh fillup or 50ml for a weekly top up.
Large Hot tub 1,500 litres (330 Gallons) of water -add 150ml for a fresh fillup or 75ml for a weekly top up.
mark pollard –
Clear water Yes it is.Normally after 3 days, my pool turns green. Not with this stuff. It has lasted for weeks.The instructions on how to use it is a bit complicated, but once you figure out how, its obviously easy.I would recommend this kit to anybody that uses their pool often.
Elaine –
Great hot tub for the price
J richards –
Do.sRead the instructions in the box and you cant go wrong.Make sure u mix the chloride in a clean bucket of hot water to dissolve the granules quicker.use a big table spoon for your measurementsDontsDo not lose the brochure that tells you your mixtures for daily and weekly mixtures..dont mix your chemicals on a sink surface as it will stain the steel
Norman –
ecerything you need for layze spa Deep Blue
Sara Gira –
great starter pack for my new lay z spa hot tub
Sascha Mann –
This kit is really useful. It has everything needed to keep our 5000 litre paddling pool clean. The test papers run out quickly but there is plenty of chemicals.
Alf Noir –
Perfect Has everything required for maintenance
A Sheikh –
Easy to use
mark garton –
Ordered the spa chemical set initially instead of the pool chemical set, however it was easy to return and company most obliging. Its got good instructions which are easy to follow. Yes would recommend
En1gma –
Easy use