4.5kw Elecro Evo Analogue Electric Heater CW Timer – Titanium Elements

Details

The Elecro EVO pool heater is manufactured from top quality components and material at the Elecro works in Hertfordshire, England.

Construction consists of a flow tube which is fitted with inlet and outlet mouldings manufactured from specially formulated polymer alloy material. The outlet moulding accommodates a reversible flow switch (allowing water input from wither direction) with a gold tipped reed switch and Titanium fulcrum pin. The inlet moulding has been designed to ensure full immersion of the elements, greatly reducing the risks of air locking.

The heater is supported on two swivel feet; these can be rotated to permit either wall or floor mounting. The heater control components are positioned on the front face of the electrical enclosure.

Operation

The desired pool temperature can be easily selected on the EVO heater using the panel-mounted thermostat dial. The single or three-phase power is supplied through a top quality Schneider contactor. Safety and equipment protection is provided by the highly reliable flow switch. Over-temperature protection is provided by the thermal cut out (manual reset).

  • Robust, durable construction
  • Fully Equipped
  • Easy Installation
  • Titanium heating elements
  • 316 Stainless Steel flow tube
  • Ultra-reliable flow switch allows safe operation as low as 1m³/hour
  • May be floor or wall mounted
  • Control thermostat 0-40°C (1°C differential)
  • Safety thermal cut our 60°C (manual reset)
  • 1½” BSP female threaded water connections
  • Suitable for use on salt water pools

£388.20 £310.56

SKU PLAT74 Category
22 people are viewing this product

Bought in the past 24 hours: 19

Out of stock|Current order processing time: 5 working days

Email when stock available

Description

Details

The Elecro EVO pool heater is manufactured from top quality components and material at the Elecro works in Hertfordshire, England.

Construction consists of a flow tube which is fitted with inlet and outlet mouldings manufactured from specially formulated polymer alloy material. The outlet moulding accommodates a reversible flow switch (allowing water input from wither direction) with a gold tipped reed switch and Titanium fulcrum pin. The inlet moulding has been designed to ensure full immersion of the elements, greatly reducing the risks of air locking.

The heater is supported on two swivel feet; these can be rotated to permit either wall or floor mounting. The heater control components are positioned on the front face of the electrical enclosure.

Operation

The desired pool temperature can be easily selected on the EVO heater using the panel-mounted thermostat dial. The single or three-phase power is supplied through a top quality Schneider contactor. Safety and equipment protection is provided by the highly reliable flow switch. Over-temperature protection is provided by the thermal cut out (manual reset).

  • Robust, durable construction
  • Fully Equipped
  • Easy Installation
  • Titanium heating elements
  • 316 Stainless Steel flow tube
  • Ultra-reliable flow switch allows safe operation as low as 1m³/hour
  • May be floor or wall mounted
  • Control thermostat 0-40°C (1°C differential)
  • Safety thermal cut our 60°C (manual reset)
  • 1½” BSP female threaded water connections
  • Suitable for use on salt water pools

Please note during extremely busy periods there may be a small additional processing time on this item.

Additional information

Weight 5 kg
EAN

5060228676802

SKU

T74

Kilowatts

4.5kw

Brand

Elecro

1 review for 4.5kw Elecro Evo Analogue Electric Heater CW Timer – Titanium Elements

  1. Julia & Hans

    5 product

Add a review

You were not leaving your trolley like that, were you?

Please enter your details below to save your trolley for later. If you have any questions please leave your email address and we will provide a swift response.